This powerful collection of six plug-ins – Dynamics, Multiband Dynamics, Equalize, Limit, Verberate and Dither – provides maximum transparency and signal accuracy. Designed for both PC and Mac, it supports VST, VST3, AAX and AU formats, ensuring seamless integration into your workflow.
Whether you’re an experienced engineer or a budding producer, the intuitive interface and high-quality processing tools make it easy to achieve professional-sounding results. Unleash your creativity and take your tracks to the next level with Mix & Mastering Suite!
Acon Digital Dynamics Dynamics is a combined compressor, expander and gate. Lookahead can be set between 0 and 30 milliseconds, and an intelligent algorithm provides a band-limited gain signal, which reduces possible distortion to a minimum even with minimal attack and release times. You can use oversampling up to 4 times to further reduce distortion. The sidechain signal can be either internal or external, and there is a full sidechain EQ integrated with low cut, low shelf, peak, high shelf and high cut filters. Despite the complexity of the algorithm, the user interface is intuitive and provides a graphical visualization of all aspects of processing. With the introduction of Mastering Suite 1.1, Dynamics now offers a new Auto Release mode , which dynamically changes the release time depending on the audio material. The new Range knob allows you to limit the maximum gain reduction during dynamics processing. Parallel compression is easily achieved with the new Mix knob, which controls the mix of processed and unprocessed audio. Features • Intelligent prediction algorithm that minimizes distortion • Latency and prediction can be set between 0 and 30 milliseconds. • Powerful sidechain filtering with full EQ section – low-pass, low-shelf, bell, high-shelf and high-shelf filters • Up to 4X oversampling • Threshold and ratio can be adjusted directly on the level history curve or using the knobs • Acts as a compressor for ratios greater than 1:1 and as an expander or gate for ratios below 1:1 • Adjustable soft knee specified in dB • Adjustable attack, hold and release times specified in milliseconds • Optional Auto Descent mode for sound-dependent release times • Channel link can be set from 0 (no link) to 100% (all channels share the same gain control signal) • Adjustable gain specified in dB with optional Auto mode Acon Digital Multiband Dynamics Multiband Dynamics is a multiband Dynamics expansion that allows dynamics processing in up to four separate bands. You can freely set the crossover frequencies, and even the filter slopes can be freely set in the range from 6 to 48 dB per octave.
Multiband Dynamics operates in linear-phase mode to avoid phase problems between the processed bands. Version 1.1 introduces mixed phase filtering, which reduces pre-ringing, a known problem with linear phase filtering.
Pre-ringing blurs abrupt transitions and thus degrades the sound quality. The new Channel Linking parameter controls how the independent channels are processed.
Features
Dynamics processing in four separate frequency bands
Spectrum analyzer with frequency range indicators, freely adjustable crossover frequencies
and freely adjustable filter slopes
Intelligent prediction algorithm that keeps distortion to a minimum
Threshold and ratio can be adjusted directly on the level history curve or using the knobs
Acts as a compressor for ratios greater than 1:1 and as an expander or gate for ratios below 1:1
Additional automatic descent mode for sound-dependent descent times
Works with both linear and mixed phase filtering.
Adjustable soft knee specified in dB
Adjustable attack and release times specified in milliseconds
Acon Digital Limit Limit is a transparent, intelligently predictive limiter with a range of 0 to 30 milliseconds that keeps distortion to a minimum. Limiting is done in two stages, followed by a precompressor with an actual peak limiting algorithm. You can use up to 4x oversampling for true peak limiting and further distortion reduction. With version 1.1, the precompressor has a new auto release mode that adapts the release time to the audio material. Features • Intelligent predictive algorithm that keeps distortion to a minimum • Pre-compression stage with adjustable attack and release times specified in milliseconds • Channel linking can be set individually for pre-compression and peak suppression with values from 0 (no link) to 100% (all channels share the same gain control signal) • Oversampling up to 4X for true peak limiting • Optional auto release mode for sound-dependent release times • Graphical history curve showing level and gain reduction over the last 5 seconds Acon Digital Equalize 2
Equalize is a parametric equalizer. Unlike other equalizers, you can freely adjust not only the center frequency, gain, and passbands, but also the filter slope for each band. The filter slope can be set anywhere from 3 dB to a super-sharp 120 dB per octave.
You can use Equalize as a zero-latency plugin using the minimal phase mode, choose to preserve phase relationships in the linear phase mode, or use the unique mixed phase mode. The mixed phase mode allows you to freely set the delay in the range from 5 to 120 milliseconds, while preserving phase relationships as much as possible.
This gives unique control over potential pre-ringing artifacts, a common problem with linear phase filtering.
Features
Up to twelve equalizer bands
Eight different band-pass filter types (low-pass, low-pass,
peaking, slope, band-pass, notch, high-pass and high-pass)
Band frequency, gain, passband, resonance and filter slope can be freely adjusted for each band
Three different filter modes: minimum phase, linear phase or the new mixed phase mode
Adjustable delay and pre-ring time in mixed phase mode
Zero delay in minimum phase mode
Channel mode (mid, side, left, right or full processing) can be set independently for each band
Multiple band selection
Resizable GUI
Solo and bypass modes
Optional automatic gain control
Additional band-pass coupling gain
Two spectrum analyzers that can analyze the input or output signal from the mid,
side, left or right channel
Graphical visualization of the EQ frequency response
Manager presets and a large number of factory presets
Save, load and categorize your custom
Verberate 2 presets When it comes to reverb, we believe it’s all about sound quality. Verberate is an algorithmic r1. Install and open the plugin in DAW2. Enter any name in the Name and Company lines3. Open AconDigital_KeyGen4. Select Acon Digital Mastering Suite and click GENERATE5. Copy the key, paste it into the registration field and click authorization6. Done!everb plugin that simulates real-world acoustic environments with exceptional realism. The first version of Verberate already raised the bar, but version 2 introduces the Vivid Hall algorithm, which adds time dispersion to avoid the harshness inherent in convolution-based reverbs while maintaining the natural, high-density reverb tails of Verberate 1. Acon Digital Dither
Dither is a dithering plugin with flexible perceptual noise shaping. You can adjust the maximum gain, and the filter length of the noise shaping filter’s frequency response is visualized graphically.
Features
Triangular probability density function (TPDF) smoothing
Physical-acoustic noise shaping filter with adjustable filter length and maximum filter gain
Graphical representation of the noise shaping filter’s frequency response
Supported target bit depths: 8, 12, 16, 20 and 24 bits
Install and open the plugin in DAW
Enter any name in the Name and Company lines
Open AconDigital_KeyGen
Select Acon Digital Mastering Suite and click GENERATE
Copy the key, paste it into the registration field and click authorization
Done!
