PSPAudioware’s PSP Plugins Bundle contains 26 plug-ins that will be indispensable for mixing and mastering engineers and producers.
- PSP 2445 EMT v1.3.11
- PSP 608 MultiDelay v1.8.0
- PSP auralComp v1.0.1
- PSP auralControl v1.2.3
- PSP BinAmp v1.1.0
- PSP BussPressor v1.1.2
- PSP E27 v1.7.3
- PSP Echo v1.5.2
- PSP FETpressor v1.2.1
- PSP HertzRider2 v2.0.3
- PSP Impressor v1.0.2
- PSP InfiniStrip v1.2.5
- PSP Lotary2 v2.1.3
- PSP MasterQ2 v2.1.4
- PSP NobleQ v1.8.2
- PSP oldTimer v2.2.1
- PSP oldTimerMB v1.2.1
- PSP PianoVerb2 v2.5.4
- PSP Saturator v1.1.2
- PSP SpringBox v1.1.2
- PSP stereoController2 v2.0.0
- PSP stompDelay v1.1.2
- PSP stompFilter v1.2.1
- PSP Twin-L v1.2.1
- PSP VintageWarmer2 v2.10.2
- PSP Xenon v1.6.1
PSP 608 MultiDelay
The PSP 608 MD is arguably the most complete delay plug-in available on the market. PSP Audioware offers you a creative tool that is not only functional but also inspiring.
Each line has settings for reverse delay, stereo expansion and panning, delay time, multi-mode filter, modulation, gain/tape saturation and reverb. In addition, reverse delay and drive can be placed at the beginning or end of the signal chain for more advanced processing options!
The modulation section includes an LFO and an envelope, as well as a tape saturation algorithm taken from our renowned mastering processors. And, of course, all this can be done with any bit depth and sample rate up to 24-bit/192 kHz, and fully automated using MIDI and any host sequencer.
PSP 2445 EMT
Reverb plug-in from PSPaudioware. Inspired by the two legendary reverbs from the dawn of the digital age, the EMT® 244 and the EMT® 245, PSP has painstakingly explored how to bring the specific features of these simple yet highly musical sounding processors into a plug-in. We then refined and created a convenient set of parameters to control the nuances of sound that are not available in the original equipment.
PSP Busspressor
PSPaudioware PSP BusPressor is a compressor optimized for group processing of channels or processing on the master bus. This is the classic sound of VCA compression with a wide range of tuning options. The control implemented in the PSP BussPressor allows you to fine-tune the high-pass filter side chain or apply parallel compression.
PSP E27
The PSP E27 is a three-band equalizer with nine groups of selectable frequencies, modeled after the E27 analog equalizer manufactured by Avedis Audio Electronics. This EQ offers +/- 16dB of boost/cut on selected frequency bands and also offers soft saturation. The low and high pass filters can be set to bell or shelf modes at the touch of a button. The E27 is suitable for mixing and mastering. The PSP E27 offers additional pre-amp stages for global level control. This EQ plugin captures the non-linear behavior of analog devices.
The PSP E27 SE (included) is a simplified version of the PSP E27 and is based on the same engine, but has a redesigned simple GUI and offers quick frequency adjustments. The PSP E27se is equipped with one E27 and one PA11. This is ideal for both mono and stereo tracks where you don’t need separate left and right channel settings.
PSP FETpressor
The PSP FETpressor is a FET feedback compressor plug-in designed to provide precise, near-instantaneous compression with high character counts. Great for vocals, guitars, bass, drums, and whenever a classic 1970s-style FET compressor is needed, the PSP FETpressor contains everything you’d expect from a FET compressor: a high pass filter with an internal sidechain to control the amount of low frequency pumping, continuously adjustable compression ratio, the ability to select a channel for processing and a link switch.
PSP HertzRider2
The PSP HertzRider2 (frequency shifter) is the successor to the PSP HertzRider. It uses algorithmic optimization and adds many important new features. It was designed to be as simple as possible, use as few resources as possible, and have very low (and frequency dependent) latency.
The HertzRider can be an incredible tool for tuning inharmonious sounds, but for harmonics it becomes a creative and destructive tool. In addition to a wide range of settings, the plugin contains an LFO (Low Frequency Generator) to provide interesting modulation options allowing you to experiment creatively with this instrument further.
PSP InfiniStrip
PSP InfiniStrip Virtual Modular Channel Strip Released
InfiniStrip offers 25 modules that you can arrange as you wish and combine them into your own effect chains. The modules are divided into eight different types: preamps, filters, compressors, equalizers, limiters, speakers, control modules and special modules. Mapping parameters will help you quickly try out different effects of the same type. Each of them has its own side entrance, which is very practical. Depending on the track you’re working with, mono or stereo versions of each device are available.
The graphical user interface provides three different views so you always have an overview on every screen, and 150 factory presets make it quick to get started with the plugin.
PSP MasterQ2
As a general rule, mastering EQs focus solely on the equalization process, but the PSP MasterQ2 isn’t just about mastering; “Q” stands for “Quality”. We designed the PSP MasterQ2 as a creative tool for mixing and mastering, or wherever its features and quality are required.
The PSP MasterQ2 can handle sampling rates from 44.1kHz to 768kHz. It offers seven different filters: 12, 24 and 36 dB/oct low and high cut filters; low and high shelf filters that can be switched to peak filters; and low-mid, mid-peak, and high-mid peak filters, all with adjustable frequency and Q over a wide range.
The EQ Graph displays an overview of the EQ curve as well as the individual characteristics of each filter. In addition to its powerful filters, PSP MasterQ2 also offers you a choice of clipping and “soft clipping” algorithms to help you shape your signal and keep it from digitally peaking. PSP MasterQ2 uses amazingly accurate 80-bit advanced floating point
calculations in all filters to eliminate any accumulation errors.It also ensures optimal filter performance even at the lowest frequencies with high gain and Q factor.
PSP MasterQ2 also uses our proprietary frequency authentication algorithm. “FAT” is a double sampling method that ensures that the filter works correctly at the highest frequencies. This mode uses high-order linear filters to prevent phase errors and linear audio bandwidth errors caused by double-order sampling. This method results in double sampling without any sample rate conversion artifacts.
We would like you to experience it for yourself – it must be heard to be believed! Use it as a precise surgical EQ for mastering or a coloring processor for sound design and mixing. Once you try it, you’ll realize what a creative sound shaping tool the PSP MasterQ2 can be.
PSP NobleQ
The PSP NobleQ combines the power of passive equalizers with a wide frequency range and enhanced functionality. To make this plugin versatile, we’ve added some modern features such as a customizable high pass filter and the ability to switch boost or cut on the high peak and shelf filters.
The PSP NobleQ stands out for its warm sound, low-shelf filters and combined peak and shelf high frequency processing. The warmth and musical sound of the PSP NobleQ is made possible by using double-sampling FAT processing to deliver natural analog response. At the output, we added a Valve rounding algorithm with an adjustable degree of processing.
Low shelf filters actually combine two shelving sections: the first allows you to boost low frequencies, the second attenuates them with slightly higher settings. Together they produce a rich foundation without haze in the low to mid ranges.
The high-frequency range consists of two filters – a peak filter with adjustable bandwidth (usually for boost) and a shelving filter (usually for attenuation). Both filters interact in such a way that the more high-frequency attenuation is applied, the more selective the peak filter becomes, thereby maintaining a similar center frequency gain.
The PSP NobleQex is an extended version of the PSP NobleQ and offers all of its features with an additional middle bell filter and adjustable low-shelf frequency offset.
PSP oldTimer
vintage style compressor designed for mixing, compressing and limiting. Our goal in developing this plug-in is to provide a simple compressor that offers an exceptionally musical sound with a minimum of effort. This plug-in is not based on any specific hardware, rather it is inspired by vintage processing and designed to emulate some of the favorite features of such compressors.
This compressor is so simple and so easy to use that it’s hard to make it sound bad even at extreme settings!
This compressor offers soft and smooth compression in most applications, however it can slightly gloss over the sound with its tube transient emulation when heavily driven internally by high compression values.
PSP oldTimerMB
Vintage 3-band virtual compressor
The PSP oldTimerMB is a vintage style multi-band compressor designed for demanding single track and whole mix processing and mastering. Our goal in developing this plugin was to develop a high performance multiband processor based on the algorithm of our popular PSP oldTimer compressor. The result is a processor with a warm, musical sound and a wide control range, making it an indispensable tool for almost any kind of music.
Enjoy the versatility and quality of PSP oldTimerMB!
PSP PianoVerb2
PSP PianoVerb2 is a redesigned and improved creative resonant reverb plugin based on our famous free PSP PianoVerb plugin. This new version offers a redesigned GUI with a brand new resizing feature and a new preset management system. Like the original PianoVerb, it creates its own unique sound with twelve resonant filters that mimic the behavior of piano strings. The ability to transpose, tune, and detune a set of strings allows PianoVerb2 to be tuned to reproduce a wide range of reverbs, from traditional, widespread reverbs to unique and unusual resonances.
With the addition of a brand new modulation section and the ability to set multiple timing, damping, and decay freeze settings (using the A/B compare function), this plug-in provides amazing opportunities for creative use. Add to that some other amazing new additions such as a high pass filter section, independent Dry/Wet controls and a reverb tail freeze control, it’s easy to see how PianoVerb2 has become a comprehensive and truly unique algorithmic reverb.
PSP Saturator
A new addition to the PSP Audioware line, the PSP Saturator takes its advanced algorithms and takes saturation quality to the next level and can practically heat up your production.
The PSP Saturator simulates the way analog devices such as tape recorders and valve circuits heat up and “saturate” your audio material. This is achieved through the addition of harmonics, special filtering and dynamic processing. The PSP Saturator uses three algorithms to emulate these devices and offers eight different shape modes for maximum flexibility, from subtle “mojo mixing” to total sound destruction.
PSP SpringBox
The PSP SpringBox is an emulation of a hardware spring reverb. It recreates several features typical of a spring reverb, such as the characteristic “boeing” on transients and the repetitive, resonant musical character with adjustable presence.
There are two to six spring configurations to choose from, as well as the ability to set stereo spread and pan/balance to suit a variety of mix setups, from a typical guitar reverb to creative use as a reverb send in a mix. With two settings for channels A and B in the PSP SpringBox and a number of presets, control is quick and easy.
PSP Twin-L
Simulate VCA or Opto devices of your choice.
PSP Audioware has released a new PSP Twin-L limiter based on two processing algorithms. Users can optionally activate one of two modes of operation: VCA emulation or Opto-limiters. Despite this, the developers say that the algorithms are not based on any specific devices, but are created by a team of developers on their own.
PSP VintageWarmer2
The PSP VintageWarmer2 is a high quality digital simulation of an analog single or multiband compressor/limiter. It combines rich, warm analog processing with a simple user interface and comes with an extensive library of presets.
The PSP VintageWarmer2 is highly flexible and can be used for both compressing soft knees and limiting a brick wall. This makes it an indispensable tool for mixing and mastering engineers.
Particular attention has been paid to the overdrive characteristics of the PSP Vintage Warmer, and the algorithm is capable of generating saturation effects typical of analog tape recorders. The PSP Vintage Warmer also includes professional VU and PPM measurements along with accurate gage indicators for professional quality results.
The PSP Vintage Warmer2 version installer contains 3 versions of the plugin:
- PSP MicroWarmer: Provides the same sound quality as its siblings, but with a simplified single-band interface and low latency performance optimized for single track use.
- PSP VintageWarmer (LE): A direct descendant of the original PSP VintageWarmer, with all of its advantages such as low resource usage and latency.
- PSP VintageWarmer2: Which includes our famous FAT double sampling mode for even more accurate analog sound processing.
We strongly recommend that you use the PSP VintageWarmer (LE) or PSP MicroWarmer in applications with multiple tracking functions, except in situations where FAT mode is important. The PSP VintageWarmer2 is recommended for use in mastering sessions or when processing groups or master busses.
PSP auralControl
PSP auralControl is an indispensable tool for multi-channel tracking, mixing and mastering. Its purpose is to individually adjust the level, polarity, bandwidth and timing for each individual channel in a multi-channel set.
Predefined standard multi-channel formats, the ability to group and display all functions on one screen, PSP auralControl saves time in almost every surround sound project. Whether it’s fixing imbalances in a multi-channel live stem, solving problems with a multi-channel reverb track, not wanting to limit the spectrum of the LFE or ceiling speakers, or adjusting the timing and level of the center channel in relation to left and right, the PSP auralControl offers a direct solution to these problems.
We have developed this plugin to make life easier for our friends. Special thanks to Thor Fienberg for the initial idea, inspiration and help from the very beginning of the project.
PSP auralComp
Affectionately nicknamed “Avocado”, it is a multi-channel compressor and limiter designed from start to finish to be powerful, simple and flexible in all kinds of surround sound and immersive audio applications.
PSP auralComp is the first in a series of plugins created in partnership with acclaimed immersive audio pioneer Ronald Prent, whose credits include Depeche Mode, Helloween, Manowar, Iron Maiden, Rammstein, Def Leppard, Richie Hawtin, Celine Dion, Simple Minds and many more. Ronald helped design and tune analog multi-channel dynamics processors and mixing/mastering consoles, and brought his experience to the PSP for use in the PSP auralComp.
PSP Impressor
The PSP Impressor is an incredibly accurate, full-featured, high-precision compressor designed to process entire mixes, busses, or individual tracks. The PSP Impressor emulates the magical characteristics of classic valve and optoelectronic compressors as well as classic modern compressors. The PSP Impressor also features an easily customizable side chain. The side chain filter has a significant impact on the sound and performance of the PSP Impressor. Depending on your sidechain filter settings, the filter also allows you to use the compressor as a de-esser or to reduce the pumping effect of heavy kicks and the like.
The PSP Impressor also works very well in combination with the PSP Saturator. With the PSP Impressor in front of the PSP Saturator in the signal path (think of it like putting a bus compressor in front of a tape recorder), you can use both plug-ins at the same time (using fine tuning!) to create a very cohesive sound. as if your mix was created on expensive analog equipment. Of course, you can also change the order by placing the PSP Saturator before the PSP Impressor – never be afraid to experiment!
PSP L’otary2
PSP L’otary2 is a high quality rotary speaker emulation. We based our algorithm on two original and legendary models, the Leslie® 122 and Leslie® 147, and spent hundreds of hours perfecting our simulations.
In other words, it’s not just another modulation effect! The PSP L’otary is capable of reproducing the classic sounds of the famous rotary speakers as faithfully as possible.
PSP L’otary2 is also capable of creating new sounds and tones not possible in the original. For example, you can set up a rotating tweeter and a rotating woofer independently and emulate speakers with a static drum or even a broken horn or drum motor.
PSP Xenon
It is a full-range, two-stage limiter featuring a built-in equalizer, advanced K-System metering, and psychoacoustically optimized word length reduction. The PSP Xenon delivers flawless 64-bit precision processing throughout the signal path and can handle sample rates up to 192kHz.
PSP BinAmp
This is an emulation of a Class A triode preamplifier. This implementation of the preamp is based on the legendary Binson Echorec 2 delay.
While the Echorec 2 was incredible for many reasons, the inspiration for the PSP BinAmp came from the original design and wonderful sound of its preamp. This easy-to-use plug-in delivers rich, easily controlled saturation that sounds great on everything from drums and vocals to electric pianos, synths and drum loops.
PSP stereoController2
Designed to control, adjust and restore incorrectly recorded two-channel stereo tracks or process them for specialized applications or cool sound tricks.
PSP Echo
This is a high quality echo processor. The PSP Echo’s powerful and unusual features, combined with its smooth performance, make it ideal for all sorts of creative uses, from simple slapbacks and sustain effects to ping-pong delays and surround echoes.
PSP stompDelay
This is a creative delay plugin designed to provide a wide range of sounds from lush analog tape delays to bright loops, classic ping pong delays and raspy pitch shifts. It has both traditional delay effects and an “infinity mode” looper (Infinity mode). The PSP stompDelay offers a continuous tempo as well as accurate tape simulation, including simulating the volume reduction that occurs when fast-forwarding or listening to a tape.
PSP stompFilter
It is a creative tool designed to provide an exceptionally wide range of filter and amplification modulated sound effects. Its effects include a low pass filter with LFO modulation; low pass filter; auto-wah; low, band or high-pass and compressor. With a continuously adjustable filter type and flexible low-frequency signal cross-modulation with an envelope detector, the PSP stompFilter is able to provide bright, expressive filtering. Just a pinch of adjustable LFO randomization will provide analog “imperfections” ensuring you never get bored.
